Today, the editor will introduce to you some relevant information about how to increase maintenance of the drip irrigation tape production line. I hope it can help you to use it when purchasing and using it in the future. Please follow the editor. Learn about the following introduction. Check the lubrication points of the machine frequently, and add or replace lubricant on schedule. The reduction box of the drip irrigation belt production line is filled with mechanical oil, and the oil is replaced with new oil after the first working hours, and then every hour.
For cleaning of the extrusion system, if the machine is not used for a long time, stop feeding before the last work is completed, turn the screw at low speed to squeeze out the material as much as possible, remove the belt cover and use a special tool to eject the screw. Clean the screw and barrel quickly before they cool completely.
It is strictly forbidden to use gauze when cleaning the drip irrigation tape production line to avoid accidental wear of the screw. After cleaning, apply mechanical oil to prevent rust and push it into the keyway when assembling. It is strictly forbidden for all kinds of metal debris to enter the barrel of the drip irrigation tape production line to avoid damaging the screw. If oil leakage is found, replace the oil seal gasket promptly. Always check whether the thermocouple is damaged and replace it in time. When the machine is shut down for a long time, drain the water in the forming wheel, wrap the forming wheel well, and separate the forming wheel from the small pressure wheel.
Drip irrigation tape production line